Scroll to the bottom and click Add under Multiple DHCP Server. Scroll to the bottom and change Wireless from LAN to None. Now that we have the wireless network setup, we need to have the DHCP server issue IP addresses within its range. I'm not going to cover it in this article. As far as wireless encryption goes, that's up to your preferences. This will prevent wireless clients from communicating with each other. Change AP Isolation from Disable to Enable and click Apply Settings. Now click on Wireless > Advanced Settings. Change Network Configuration from Bridged to Unbridged. For this scenario, we will set the wired network to 192.168.1.1/24 and the wireless network to 192.168.2.1/24.įirst, we will log into the router interface and go to Wireless > Basic Settings. I've also done this setup on a WRT54G v8.2 with DD-WRT Micro v24 sp1, so I imagine that any version of DD-WRT v24 sp1 would work with this. For this tutorial, I used a WRT54GL v1.1 with DD-WRT NoKaid v24 sp1. ![]() The configuration takes about 20 minutes to complete. This is a good implementation for wireless cafés and other businesses that provide wireless Internet access to their customers. This way, the wireless network is able to be a little more lax on security without the threat of unsecured access to the wired network. For security purposes, we will prevent communication between both networks, as well as between wireless clients. ![]() The goal of this article is to separate the wireless LAN from the hardwired LAN, with an independent class c network for both interfaces.
0 Comments
Leave a Reply. |